Categories

Newsletter

Orange Pi Prime: 2GB RAM 1.4Ghz x64 Quad-Core Processor

It’s an open-source 64 bit single-board computer. It can run Raspberry Pi software, Android, Ubuntu, Debian & Banana Pi Images. It uses the 1.4Ghz 64 bit quad core Cortex A53 ARM AllWinner H5 SoC, built in wifi and bluetooth, 1000M/100M speed ethernet and has 2GB DDR3 SDRAM.

More details

Availability: IN STOCK

Tinkersphere

TS2361

$52.99

The Orange Pi Prime with built in wifi, bluetooth, 1000M/100M speed ethernet, a 64 bit processor and 2GB of RAM is a little PC that can be used like any other computer and can run a full range of ARM GNU/Linux distributions including Raspberry Pi images, Ubuntu, Debian, and also Android! USB mice and keyboard compatible with ethernet connectivity and high-definition video capabilities. The Orange Pi Prime boasts a 64 bit quad core processor (H5 Quad-core Cortex-A53), high speed ethernet, high speed wifi, bluetooth 4.0, reset button as well as a microSD card reader to boot off and store to a microSD card. Hexa-core Mali450 graphics card for enhanced graphics as well! Other extra features include a built in IR receiver for controlling via a remote control, on board microphone and Power button! Pinout is the same as the Raspberry Pi 0, 3, 2 & B+ models so you have a stronger processor and extra features combined with compatibility!

In summary, the Orange Pi Prime has high speed wifi, ethernet and bluetooth connectivity as well as 2GB of RAM and a 64 bit processor. It also has a quadcore chipset (1.4Ghz Quad core Cortex A53 ARM AllWinner H5), built-in IR receiver, power button, reset button mic, separate debug TTL pins so you don't waste your GPIO pins, the double the RAM, same I/O pins as the Raspberry Pi, 3 USB ports, an ethernet port, USB OTG port, camera port, HDMI and composite video/audio outputs and microSD card storage as the Raspberry Pi 3.

Check out our Raspberry Pi / Orange Pi Starter Kit which includes all the accessories you'll need to get started!

Technical Specs:

CPU

H5 Quad-core Cortex-A53

GPU

Mali450 GPU including dual Geometry Processors(GP) and quad Pixel Processors

Supports OpenGL ES 2.0 and OpenVG1.1

3000Mpix/sec and 163Mtri/sec

Full scene over-sampled 4X anti-aliasing engine with no additional bandwidth usage

Memory (SDRAM)

2GB DDR3 (shared with GPU)

Onboard Storage

TF card (Max. 32GB) / NOR flash(optional)

Onboard Network

1000M/100M Ethernet RJ45

Onboard WIFI+BT

8723BS, IEEE 802.11 b/g/n,BT4.0

Video Input

A CSI input connector Camera

Supports 8-bit YUV422 CMOS sensor interface

Supports CCIR656 protocol for NTSC and PAL

Supports SM pixel camera sensor

Supports video capture solution up to 1080p@30fps

Audio Input

MIC

Video Outputs

Supports HDMI output with HDCP

Supports HDMI CEC

Supports HDMI 30 function

Audio Outputs

3.5 mm Jack, HDMI

Power Source

DC input 4.0x1.7mm 5V 2A

GPIO(1x3) pin

UART, ground.

USB 2.0 Ports

Three USB 2.0 HOST, one USB 2.0 OTG

Buttons

Power Button(SW2), Reset Button (SW4)

Low-level peripherals

40 Pin Header, compatible with Raspberry Pi 0, 3, 2 and 1 B+

LED

Power led & Status led

Power Control

IR receiver, Power button, Reset button

Supported OS

Android, Ubuntu, Debian, Raspbian Image

Dimensions

Product size

98 mm × 60mm

Weight

68g

 


Related Products