> All products

All products

• 

  Orange Pi Zero Case / Enclosure

  This high quality Orange Pi Zero case is black with a dark blue hue. It will protect your Orange Pi Zero with or without the expansion on top. Clearly labeled outputs with an opaque finish makes this a must have accessory for any Orange Pi Zero project!

  
  

  $8.99
  ✅ Ships 06/09/2025
• 

  Orange Pi Zero Expansion Board

  Place this expansion board on the Orange Pi Zero's 13 pin header to add 2 more USB ports, an IR Receiver, AV audio & video out and a microphone input.

  
  

  $6.99
  ✅ Ships 06/09/2025
• 

  Orange Pi Zero LTS: 256/512MB...

  The Orange Pi Zero LTS is a competitor to the Raspberry Pi Zero with full sized ports so you don't need clunky adapters, Wifi and Ethernet built in! It can run Raspberry Pi software, Android 4.4, Ubuntu, Debian & Banana Pi Images. It uses the 1.2Ghz quad core Cortex A7 ARM AllWinner H2 SoC, and has 256 or 512MB DDR3 SDRAM (select the Ram size below).

  
  

  $38.99
  ✅ Ships 06/09/2025
• 

  0805 Resistor Kit SMD - 2000pcs...

  This SMD Resistor Kit contains 0805 sized resistors in strips of 25pcs each. 80 different values for a total of 2000 resistors.

  
  

  $14.99
  ✅ Ships 06/09/2025
• 

  Remote and USB Receiver

  Control your PC or Raspberry Pi via remote with this infrared remote + USB receiver. Long retractable USB receiver cable so you can place it in a convenient spot even if your Raspberry Pi or PC is not in an accessible location.

  
  

  $7.99
  ✅ Ships 06/09/2025
• 

  Raspberry Pi Compute Module 3...

  This Raspberry Pi Compute Module 3 Development Kit features both compute modules which fit in DDR2-SODIMM sockets for embedded use. In this kit you will get 2 compute modules, CM3 and CM3L, as well as the IO Board, camera display adapter, Raspberry Pi 5V 2.5A power supply, Micro USB cable and jumper wires.

  
  

  $519.99
  ✅ Ships 06/09/2025
• 

  Pixhawk PX4 2.4.8 Flight Controller

  The Pixhawk PX4 2.4.8 Flight controller is great for multicopters with integrated backup power and failure backup control as well as Gyroscope, 3-axis Accelerometer / Magnetometer, 6-Axis Accelerometer / Magnetometer and Barometer!

  
  

  $169.99
  ✅ Ships 06/09/2025
• 

  5W 2K Ohm Power Resistor

  5 Watt 2K Ohm Power Resistor.

  
  

  $2.99
  ✅ Ships 06/09/2025
• 

  Red Silicone Mount Dual LED Light

  Dual Red LED with Silicone mount so it can be attached to nearly anything. Stretches and grips to different shaped items, clip at the back so it can easily be removed to replace the batteries. Batteries included.

  
  

  $4.99
  ✅ Ships 06/09/2025
• 

  12AWG Silicone Wire by the foot

  12 AWG Silicone Wire sold by the foot.

  
  

  $1.49
  ✅ Ships 06/09/2025
• 

  1.75mm PTFE Tube Push In Joint...

  This Pneumatic PTFE Tube Push Connector will hold your PTFE tubing in place for a clean and smooth filament feed to the hotend of your 3D printer.

  
  

  $3.99
  ✅ Ships 06/09/2025
• 

  DVI to VGA Adapter

  DVI ( 24+1 pin ) to VGA (15 pin ) adapter.

  
  

  $6.99
  ✅ Ships 06/09/2025