Use this pH sensor to measure the pH level of your projects.
Includes:
Details:
- Operating Voltage: 5V DC
- Operating current: 5-10mA
- pH Concentration Range: 0-14 pH (Na+ error at >12.3 pH)
- Reading Time: 95% in 1 second
- BNC Connector on probe
- M3 Mounting Holes on circuit board
- Isopotential point: pH 7.00 (0 mV)
- 3 buffer solutions and storage solution
- Default Baud Rate: 38400
- Offset: +/- 0.2 pH
- Operating Temperature: 0C to 80C
- Max Stability Time: 60 seconds
- Max Power Consumption: 0.5W
- Operating Temperature: -10C to 50C
- Nominal Temperature: 20C
- Working Humidity: 95% Relative Humidity
- Nominal Humidity: 65% Relative Humidity
- Life Expectancy: 3 years
- Circuit Board Size: 42mm x 32mm x 20mm
- Probe Length: approx 8 inches
- Analog Voltage Signal Output
- pH2.0 Interface ( 3 foot patch )
- Gain Adjustment Potentiometer
- Power Indicator LED
- Pinout:
- To: Temperature (optional)
- Do: Limit ("digital") pH signal (optional)
- Po: Analog pH value
- GND: 0V
- GND: 0V
- Vcc: 5V
