USB Interface Kit for Robotic Arm

Features:

• Using your computer and the included USB cable and interface software command the Robotic Arm Edge with multiple movements and functions
• Excellent introduction to robotics programming
• Add as part of your home-school curriculum
• Robotic Arm Edge sold separately
• USB interface for robotic arm edge
• Connect the robotic arm edge to a windows personal computer USB port.
• Allows real time interactive control, plus contains a built-in interactive script writer
• May be saved and loaded from disk just like any other standard computer file
• May write a script that contains up to 99 individual robotic arm functions into a single script file
• Add this USB Interface Kit to the Robotic Arm Edge for real time manual control of the robotic arm and the ability to program the arm to perform a sequence of movements.
  
• Command the robotic arm gripper to open and close, radial wrist motion of 120 Degree, an extensive elbow of 300 Degree, base rotation of 270 Degree, base motion of 180 Degree, vertical reach of 15 inches, horizontal reach of 12.6 inches and lifting capacity of 100g.
  
• Some of the added features include a search light design on the gripper and an audible safety gear indicator is included on all 5 gear boxes to prevent potential injury or gear breakage during operation. Total command and visual manipulation using the "5's", five-switch wired controller, 5 motors, 5 gear boxes, and 5 joints.
  
• This is an add on for the Robotic Arm Edge Kit. ROBOTIC ARM SOLD SEPARATELY.
• Only windows compatible at this time. However, if you have a Mac with Bootcamp loaded you can use it on your Mac. You can also use it on a tablet as long as it runs Windows and has a USB port such as a Microsoft Surface.
• For Windows 8 & up users: Be sure to disable driver signing upon installation.