Long Range 2.4G Wireless Transceiver Module with External Antenna: NRF24L01+ (Arduino & Raspberry Pi Compatible)

This Long Range 2.4G Wireless Transceiver Module is perfect for long range wireless communication in your electronics projects. It is similar to our standard 2.4G Wireless Transceiver Module but also has an external antenna for use over long distances! Communicate between 2 devices from as far as 3609 feet (1100 meters) in ideal conditions. Just hook up one of these to your Arduino, Raspberry Pi , or other microcontroller and you'll be outputting your signal over 2.4G Wireless. Add another on the receiving end and you'll be able to listen in to your 2.4G Wireless signal with ease! Super easy to set up and use.

 Specifications:

• Module Type: Transceiver (Both Transmitter & receiver all in one!)
• Antenna Type: External
• Working Range: up to 3609 feet (1100m)
• Supply Voltage: 1.9V - 3.6V (Raspberry Pi Compatible & for Arduino, use the 3.3V pin for power (all signal pins are 5V tolerant for direct connection to your Arduino))
• Chipset: nRF24L01+ (2.4GHz ISM band tranceiver)
• Protocol: SPI
• Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps)
• Current Draw: 11.3mA transmitting, 13.5 receiving at 2Mbps, 900nA in power down, and 26uA in standby.
• Internal Gaussian Frequency-Shift Keying (GFSK) modulation an fast Automatic Gain Control (AGC)
• Interrupt Request (IRQ) pin (can be used to wake the microcontroller, such as Arduino or Raspberry Pi, from sleep when the module receives a transmission to save battery)
• Auto-acknowledge and auto-retransmit.
• Contents: 1 Long Range 2.4G Wireless Transceiver Module with External Antenna

Useful resource: http://www.deviceplus.com/how-tos/arduino-guide/nrf24l01-rf-module-tutorial/