Categories

Tinkersphere NYC

» NYC Store Location & Hours

Newsletter

Motors & Wheels

Motors for all your projects: Standard DC Motors, Servo Motors for angle precision, Brushless Motors for Quadcopters & Helicopters & peripherals.

Hobby Motor 6V - 12V DC 14000rpm
This Size 130 hobby motor has flat sides for easy mounting to your projects and takes any voltage between 6V and 12V DC.
$3.99
In Stock
Large Vibration Motor (3V - 6V)
Use this Large Vibration Motor to add a strong vibration to your larger projects. Apply 3V - 6V across the terminals to get some strong haptic feedback.
$4.99
In Stock
2mm Shaft / Axle
Add an axle to your projects. Works great for gearboxes and RC car axles. Measures 2mm in Diameter and 3.94" long.
$1.69
In Stock
Shaft Coupler 3mm to 5mm
Connect a 3mm shaft to a 5mm shaft or smaller with this shaft coupler. With 2 set screws for each side, you'll get a secure connection every time.
$4.99
Sold Out/Backorder
Shaft Coupler 2mm to 5mm
Connect a 2mm shaft to a 5mm shaft or smaller with this shaft coupler. With 2 set screws for each side, you'll get a secure connection every time.
$4.99
In Stock
Dual Motor Driver 600mA L293D
Control up to 2 small DC motors or 1 stepper motor with this Dual Motor Driver Module based on the popular L293D. Arduino & Raspberry Pi Compatible.
$6.99
In Stock
Motor Driver 2A Dual L298 H-Bridge
Control up to 2 DC motors or 1 Bi-polar stepper motor with this Dual H-Bridge Module based on the popular L298N.
$7.99
In Stock
EasyDriver Stepper Motor Driver
Control 4, 6, or 8 wire stepper motors with any 5V or 3.3V microcontroller. Arduino & Raspberry Pi Compatible.
$14.99
In Stock
2 inch Linear Actuator 12v 225lbs
Use this Linear Actuator to push something that weighs up to 112 pounds up to 2 inches!
$89.99
In Stock
2.2 inch Propeller for Science...
Attach this propeller to a 2mm motor shaft or 2mm axle to quickly create a mini powered fan for your science projects.
$2.99
In Stock
Robot Wheels (4 pack) 1.6"
This pack of 4 Robot Wheels includes 4 wheels with a diameter of 1.6" (40mm)! They have a 1.95mm center hole so they can be slipped directly onto our 2mm shaft snugly!
$5.99
In Stock
Metal Ball Caster
This Metal Ball Caster allows your wheel to rotate in any direction. When you want to add a contact point without adding friction, this is your solution.
$4.99
In Stock

4-channel I2C-safe Bi-directional Logic Level Converter - BSS138: Ever wanted to use an Arduino compatible device with Raspberry Pi or...
Read more
Mini ESP-M3 ESP8285 Breakout Board: This ESP-M3 ESP8285 Mini IoT Board is a wifi-enabled microcontroller...
Read more
ESP8266 Wifi Shield: ESP8266 Wifi Sheild for Arduino boards. This is a budget Wifi Shield...
Read more
Bone Conductor Transducer - 4 Ohm 3 Watt: Bone Conductor Transducer - 4 Ohm 3 Watt
Read more
Glow In the Dark Thread: Glow in the Dark Thread! Sew it into wearables and costumes for a little...
Read more
Isopropyl Alcohol 99% 16oz: 99% Isopropyl Alcohol for cleaning electronics. 16oz bottle. Quick...
Read more
Mini 2 Channel USB PC Oscilloscope: Mini 2 channel oscilloscope you can connect to your PC for quick circuit...
Read more
SATA to IDE Adapter: Bidirectional SATA to IDE Adapter converts from SATA to IDE and IDE to...
Read more
SD Card Extension Cable - 60cm (23 inch) long cable: Full Size SD Card Extension Cable so you can swap your SD card in and...
Read more
Mini USB Breadboard Power Supply Module 3.3V & 5V (Arduino & Raspberry Pi Compatible): Plug this Mini USB Breadboard Power Supply Module directly into your...
Read more

» All new products