MK2B Heat Bed for 3D Printers Maximize

MK2B Heat Bed for 3D Printers

This 3D Printer Heat bed gets hot when you power it up. Keeps your prints from warping during printing due to a temperature difference. Reprap compatible.

More details

Availability: SHIPS TODAY

Last Updated: 06/12/2024




Use this MK2B Heat Bed to prevent warping during 3D Printing. Power it up and it will become heated. Compatible with RepRap based 3D Printers.


  • MK2B Heat Bed for 3D Printers
  • Power Input Voltage: 12V or 24V
  • Size: 8.43" x 8.43"
  • Board Type: Laminate FR4
  • Board Thickness: 1.6mm +-0.15 mm
  • Number of Layers: 2
  • Board Copper Thickness: 35um
  • Color: Red with White silkscreen
  • Copper plated holes
  • Resistance: 1 - 1.2 Ohm

    Safety Info:
  • Wait at least 10 minutes after powering off before touching! The board will be hot even after powered off.
  • Do not leave unattended.
  • Keep away from children.

will this be compatible with the elegoo neptune 2s bed I understand this states it works for RepRap printers but i am unsure if the elegoo fits that it does use PLA so im thinking
It is slightly smaller (200x200mm) so the screws to mount it probably won\'t line up exactly but the power voltage works with 24V so it should heat up when plugged into your controller as long as you can get it physically attached to the printer.
Default User Icon EXavion · 01/18/2023
Was this answer helpful? (0) (0)