> Parts & Components>Power

Power

• 

  Wireless Charging Receiver - USB-C

  Charge your phone, tablet, Raspberry Pi or other USB-C device wirelessly with this Qi Wireless Charging Receiver! Plug the USB Type-C plug into your devices and place the pad over a wireless charger to charge!

  
  

  $11.99
  ✅SHIPS 10/14/2025
• 

  FQP27P06 P-Channel Mosfet 60V 27A

  P Channel Mosfet for high voltage and current loads.

  
  

  $1.49
  ✅SHIPS 10/14/2025
• 

  Raspberry Pi 4 Model B Official...

  Power your Raspberry Pi 4 Model B using this USB C Wall Power Adapter. Provides a beefy 3A of current so your voltage doesn't drop too low when using the Raspberry Pi with multiple peripherals.

  
  

  $10.49
  ✅SHIPS 10/14/2025
• 

  4 Pin IDE SATA Power Supply 12V...

  4 Pin IDE SATA Power Supply 12V 0.5A 500mA

  
  

  $10.99
  ✅SHIPS 10/14/2025
• 

  DC Power Coupler - 5.5x2.1mm...

  Connect two DC power plugs together with this DC power coupler that converts a male DC Plug into a Female DC Jack 5.5x2.1mm.

  
  

  $3.99
  ✅SHIPS 10/14/2025
• 

  Solar Panel 4V 60mA 0.24 Watt...

  Solar Panel 4V 60mA 0.24 Watt with Wire Leads

  
  

  $4.99
  ✅SHIPS 10/14/2025
• 

  TIP107 PNP Power Darlington...

  Use this TIP107 PNP Darlington Power Transistor to control something that draws up to 100V and 8A from your low power circuits & microcontrollers.

  
  

  $1.99
  ✅SHIPS 10/14/2025
• 

  12V Micro Relay - SPDT

  12V SPDT Relay. Small size, 6 pin relay. Use a 12V signal to control up to 220VAC or 30VDC devices that draw up to 3A.

  
  

  $2.49
  ✅SHIPS 10/14/2025
• 

  DC Motor Speed Controller:...

  Need to add a motor to your project? This is the easiest way possible! Just plug both wires from your motor into the 2 scew terminals on the right and plug between 6V and 28V power and ground to the 2 screw terminals on the left. That's it! Turn the knob to speed up or slow down your motor.

  
  

  $9.99
  ✅SHIPS 10/14/2025
• 

  Automatic Step Up Down Charging...

  With this DC-DC Step Up Down Regulator Module you can maintain a certain the voltage even if your voltage goes above or dips below the desired output voltage! Maintain a steady voltage by setting the desired output from 1V to 30V!

  
  

  $11.99
  ✅SHIPS 10/14/2025
• 

  NiCd / NiMH USB Battery Charging...

  USB Charger for NiCd and NiMH Batteries with JST SM Plug on the end. 4.8V 700mAh charger.

  
  

  $9.99
  ✅SHIPS 10/14/2025
• 

  Safety 1st Outlet Cover with...

  Protect electrical outlets from being touched / tampered with. Keep Children Safe - Prevents children from accessing outlets and prevents cord entanglement for total protection.

  
  

  $4.89
  ✅SHIPS 10/14/2025