5V Stepper Motor

To use this unipolar stepper motor, just hook up each of the 5 wires. Red is for GND, Pink is for B1, Orange is for A1, Yellow is for A2, Blue is for B2. Stepper motors are useful for tasks where you require low or medium acceleration with high holding torque for movement in steps. Stepper motors have many magnetic poles within them which form "steps".

• Rated voltage ： 5VDC
• Number of Phase ： 4
• Speed Variation Ratio ： 1/64
• Stride Angle ： 5.625° / 64
• Frequency : 100Hz
• DC resistance ： 50Ω±7%(25℃)
• Idle In-traction Frequency : > 600Hz
• Idle Out-traction Frequency : > 1000Hz
• In-traction Torque >34.3mN.m(120Hz)
• Self-positioning Torque >34.3mN.m
• Friction torque : 600-1200 gf.cm
• Pull in torque : 300 gf.cm
• Insulated resistance >10MΩ(500V)
• Insulated electricity power ：600VAC/1mA/1s
• Insulation grade ：A
• Stepper Motor Plug Type: XH-5P
• Rise in Temperature <40K(120Hz)
• Noise <35dB(120Hz,No load,10cm)

• Wire Colors:
  • 1: B1: pink
  • 2: A1: orange
  • 3: A2: yellow
  • 4: B2: blue
  • 5: GND: red

Click here for a simple experiment using an Arduino and ULN2003 Module to control this stepper motor.