Anemometer Wind Speed Sensor
Price:
$44.75
This anemometer measures wind speed! As it rotates, it drives a small DC generatorwhich produces DC voltage. The voltage output increases from 0 to 4V.
Features:
- Anemometer
- Analog Output from 0 to 4V DC
- Measure wind speed
- Max wind speed: 124 mph
- Max Voltage (at max wind speed): does not exceed 4V
- Nominal wind speed: less than 64mph (0 to 2V output)
- As speed increases, voltage increases
- Number of bowls: 3
- Bowl Type: Spherical
- Bowl Diameter: 1.5 inch
- Bowl Pitch: 120 degrees
- Diameter of Anemometer: 5.35 inches
- Height: 2.6 inches
- 46mm diameter base with 3 mounting holes 31mm apart from eachother (18mm from center)
- Base Screw Hole Mount Size: M6
- Cable Length: approx 9.8ft
- Suitable for DIY Weather Stations, Raspberry Pi and Arduino Weather Station projects and other projects where a microcontroller is used to measure windspeed.
- The sensor is self-generating, no additional power supply necessary. When there is wind rotation, it generates the voltage signal.
- Pinout:
- Red: Analog Signal Out - values from 0 to 4V DC (connect to microcontroller analog input pin)
- Black: Ground - Ground 0V (connect to microcontroller GND)
- Formulas for calculating wind speed from signal output voltage:
- Voltage (V)*50=KM/H (wind speed)
- Voltage (V)*14=M/S (wind speed)
- If the current output signal voltage is 0.5V, it indicates that the current wind speed is about 25KM/H or about 7M/S
- For threshold detection you can just look up the voltage on the graph provided and compare if the sensor's voltage is above the voltage for that wind speed.
- Mount in a horizontal position