Categories

Newsletter

Motors & Wheels

Motors for all your projects: Standard DC Motors, Servo Motors for angle precision, Brushless Motors for Quadcopters & Helicopters & peripherals.

4mm Motor Shaft Coupling Joint
Use this universal metal joint to connect 2 motor shafts or axles. Fits 3mm to 5mm shafts with set screws for size adjustment!

$8.75
Ships Today
Motor Mounting Bracket
Mount your 6V Wheel and Motor to a chassis easily using this motor mounting bracket. M3 Screw Size.

$1.99
Ships Today
Low Speed DC Motor 12V / 21 RPM
This Large Low Speed DC Motor is geared down to reduce speed to 21 RPM (revolutions per minute). Apply 12V across the terminals to power it.

$19.99
Ships Today
Low Speed DC Motor 6V / 39 RPM
This Low Speed DC Motor is geared down to reduce speed to 39 RPM (revolutions per minute). Apply 6V across the terminals to power it.

$17.99
Ships Today
Servo Tester
Control up to 3 servos with this Servo Tester. It emits a PWM signal on up to 3 outputs when the knob is turned left and right.

$7.99
Ships Today
SpringRC SM-S4303R Continuous...
This Continuous Rotation Servo is perfect for Robots including the Windows 10 Raspberry Pi Robot! Continous Rotation means it can spin more than 360 degrees while giving you speed control!

$12.99
Ships Today
Solenoid Water Valve 24V 1/2"
Control the flow of water using this Solenoid Water Valve. Give it 24V and water will flow through from one end to the other.

$7.99
Ships Today
Ball Bearing Swivel Wheel
This Universal Ball Bearing Swivel Wheel can spin 360 degrees freely due to internal ball bearings.

$4.99
Ships Today
6V - 12V Solenoid
This 6 to 12 Volt Solenoid contains an electromagnet that pushes out the plunger when 6V to 12V is applied. Useful for pushing buttons or switches and pulling objects. Great source of linear motion.

$12.49
Ships Today
GT2 Timing Gear / Pulley
Use this GT2 Timing Gear / Pulley to make belt drives with GT2 timing belts just like you'll find on 3D printers and CNC machines. With 2 Set screws for easy mounting on axles.

$11.99
Ships Today
Metal Gear Servo 15kg / 4.8-7.2V
This Standard 180 degree metal gear servo motor is perfect for your robot arm, model airplane rudder, or any project that needs a motor with the ability to rotate back and forth to a specific degree within the range of 180 degrees while having the extra durability of metal gears that won't wear down as fast over time!

$13.99
Ships Today
12V DC Motor 160mA 11500RPM
A simple 12V motor for science projects and electronics projects where you'd like a spinning motor. Just power with 12 volts across the two metal terminals and the shaft will spin.

$6.99
Ships Today

⚡ Flash Sales ⚡

-8%
3 Pin Female to Female Jumper Wire / Servo Cable
$0.95 $0.87

» All Flash Sales