Categories

Newsletter

All products

Female 4 Pin JST XH Connector
4 Pin Female JST connector for your custom circuit boards and Lipo battery sockets.

$1.79
✅SHIPS TODAY
Shaft Coupler 5mm to 5mm
Connect a 5mm shaft to a 5mm shaft or smaller with this flex shaft coupler. With 2 set screws for each side, you'll get a secure connection every time.

$4.99
✅SHIPS TODAY
Male 3 pin JST SM Crimp Connector
Crimp this connector onto wires to add a Male 3 Pin JST SM Connector.

$1.49
✅SHIPS TODAY
2 Pole Screw Terminal...
These Green 2 pole Screw Terminals are useful for plugging into your breadboards and perfboards when using thin gauge wires. With 2.54mm between the pins, these connectors will fit into your 2.54mm pitch circuit boards.

$0.99
✅SHIPS TODAY
CD4027 JK Flip Flop
JK Flip Flop Dual Edge Triggered J-K Master-Slave

$2.49
✅SHIPS TODAY
TEA5767 FM Radio Module
FM Radio Module for frequencies 76Mhz to 108Mhz controlled via I2C serial.

$8.99
✅SHIPS TODAY
Shaft Coupler 5mm to 6.35mm
Connect a 5mm shaft to a 6.35mm shaft or smaller with this flex shaft coupler. With 2 set screws for each side, you'll get a secure connection every time.

$5.99
✅SHIPS TODAY
Male 4 Pin JST XH Connector
4 Pin Male JST connector with wire leads for your Lipo batteries and balance chargers.

$1.79
✅SHIPS TODAY
Ferric Chloride 475mL
Ferric Chloride is used to eat away the copper when making your own custom PCBs.

$24.99
✅SHIPS TODAY
HDMI Splitter
Play the same video on 2 screens at once with this HDMI splitter. Splits 1 to 2. Screens must be the same size and resolution if both will be on at once.

$6.99
✅SHIPS TODAY
Snap On Ferrite Choke
Snap this Ferrite Choke onto your cables for protection from interference. Snap together design so you can easily attach and remove from your wires!

$2.99
✅SHIPS TODAY
USB Audio Adapter (Raspberry Pi...
Plug into a USB port to provide audio over USB. Useful for adding high quality audio to your Raspberry Pi.

$4.95
✅SHIPS TODAY