> All products

All products

• 

  Wire Spool 52 AWG / 43.7 yards

  Ultra thin 52 AWG wire spool. 43.7 yards per spool

  
  

  $4.99
  ✅ Ships 06/16/2025
• 

  Soldering Gun with Solder...

  Soldering Gun with Solder Injector and Spool Holder. Automatically feed solder while soldering with just a pull of the trigger. Frees up your hand while soldering so you can use just 1 hand instead of 2!

  
  

  $24.99
  ✅ Ships 06/16/2025
• 

  RJ11 Coiled Telephone Cord 12ft

  Coiled Telephone Cord measuring 12 feet suitable for connecting your home / office phone to a phone box.

  
  

  $6.99
  ✅ Ships 06/16/2025
• On sale now!

  Infrared LED Ring Attachment for...

  Add night vision to your Raspberry Pi projects with this Infrared LED ring attachment for the Raspberry Pi NoIR cameras.

  
  

  $10.11
  List: $10.99 (8% off)
  ✅ Ships 06/16/2025
• 

  NE5532 Pre-Amplifier Preamp with...

  Use this NE5532 Pre-Amplifier board to adjust treble, alto, bass and volume with the 4 different dials. AC 12V NE5532 Pre-Amplifier Preamp. Soldering Kit. 4 convenient dials to control treble, alto, bass and volume separately.

  
  

  $14.99
  ✅ Ships 06/16/2025
• 

  Vacuum Tube Stereo Amplifier Kit

  Put together this Stereo RCA Vacuum Tube Amplifier kit to increase the amplitude or power of a signal for Hifi applications! Soldering Kit.

  
  

  $16.99
  ✅ Ships 06/16/2025
• 

  NE5532 Pre-Amplifier Preamp Bass...

  Use this NE5532 Pre-Amplifier board to amplify mono or stereo audio. DC 12V-24V Low-pass Filter NE5532 Bass Tone Subwoofer Pre-Amplifier Preamp. Comes fully assembled. 2 convenient dials to control each channel independently.

  
  

  $9.99
  ✅ Ships 06/16/2025
• 

  XNOR Gate: 74LS266

  This chip includes 4 basic digital logic XNOR gates. Each XNOR gate takes in 2 inputs and gives out a HIGH output if input 1 OR input 2 is are the same (both HIGH or both LOW) but not one or the other. 

  
  

  $1.99
  ✅ Ships 06/16/2025
• 

  80W Soldering Iron with Digital...

  A high power soldering iron with built-in temperature control. The LCD screen built into the handle shows the temperature. Provides 80W of power for high heat soldering applications as well as low heat applications. Just press the buttons by the LCD to select your temperature from 200C to 450C!

  
  

  $28.95
  ✅ Ships 06/16/2025
• 

  TSL2591 High Dynamic Range...

  Use this Ultra High Range Light Sensor Module to get precise luminosity readings. Configurable gain/timing ranges so you can measure from 188 uLux to 88,000 Lux. Arduino and Raspberry Pi Compatible.

  
  

  $6.90
  ✅ Ships 06/16/2025
• 

  ATSAMD21 Cortex M0 Mini Breakout...

  An upgrade from 8-bit/16MHz Arduino microcontrollers, the SAMD21 Mini Breakout is a Pro Mini-sized breakout for the Atmel ATSAMD21G18, a 32-bit ARM Cortex-M0+ processor with 256KB flash, 32KB SRAM, and an operating speed of up to 48MHz. Solves the problems of low storage limits and dynamic memory stack overflows and fully supported in the Arduino IDE and...

  
  

  $19.90
  ✅ Ships 06/16/2025
• 

  DIY Clapper Switch

  Control your lights with two claps. The on board microphone picks up on loud noises (claps). When a single clap is detected, a countdown begins, and the device waits for another clap. If another clap is detected within a short period after the first clap, then the relay will turn on, and stay on until another two claps are detected.

  
  

  $3.99
  ✅ Ships 06/16/2025