e-Ink / e Paper Raspberry Pi Hat

Features:

• 2.7 inch eInk / ePaper Display for Raspberry Pi
• Hat design: fits directly on top of the Raspberry Pi's 40 pin GPIO
• Resolution: 264x176
• Ultra low power consumption that stays locked on the last loaded screen (Power only used to refresh the image!)
• Wide viewing angle
• Looks great even in bright sunlight
• 4 buttons onboard
• Communication Protocol: SPI (both 3 and 4 wire)
• 5V and 3.3V Compatible
• Outline dimension: 85mm × 56mm
• Display size: 57.288mm × 38.192mm
• Dot pitch: 0.217 × 0.217
• Grayscale: 2
• Full refresh time: 6s
• Refresh power: 24mW(typ.)
• Standby power: <0.017mW
• Viewing angle: >170°

• SYMBOL	DESCRIPTION
  VCC	3.3V/5V
  GND	Ground
  DIN	SPI MOSI pin
  CLK	SPI SCK pin
  CS	SPI chip selection, low active
  DC	Data/Command selection (high for data, low for command)
  RST	External reset, low active
  BUSY	Busy status output, low active