Categories

Newsletter

Load Cell - 50kg

Load cell for measuring weights up to 50kg.

More details

Availability: IN STOCK

Tinkersphere

TS2032

$9.99

Features:

  • The internal 1000 ohm half bridge strain gauge, the measuring range is 50kg weighing sensor, half bridge structure.
  • Size: 34mm x 34mm
  • This sensor can be used in 3 methods:
    1, using a sensor with an external resistance to form a full bridge measurement, range with a single sensor: 50kg. External resistance must be higher.
    2, using two sensors to form a full bridge measurement, the range of two sensors is: 50kgx2=100kg
    3, using four sensors to form a full bridge measurement, the range of four sensors is: 50kgx4=200kg
  • Capacity: 50kg
  • Comprehensive: 0.10 %F.S
  • Output Sensitivity: 1 +/- 15% mV/V
  • Non-linearity: 0.05 %F.S
  • Repeatability: : 0.05 %F.S
  • Hysteresis: 0.05 %F.S
  • Zero Output: +/- 0.3 mV/V
  • Creep (1 min): 0.1 %F.S
  • Zero Drift (1 min): 0.1 %F.S
  • Temp Effect on Zero: 0.3 %F.S/10
  • Temp Effect on Output: 0.1 %F.S/10
  • Input Resistance: 1000 +/- 10 Ohms
  • Output Resistance: 1000 +/- 10 Ohms
  • Insulation Resistance: greater than 2000M
  • Excitation Voltage: 10VDC
  • Operating Temperature: -10C to +50C
  • Overload Capacity: 150 %F.S
  • Working Voltage: 5V
  • When measuring, the force should be applied to the outer side of the strain E-shaped portion of the sensor and the outside edges to form a shearing force in the opposite direction (i.e., the middle of the metal beam should bend with the center affixed to the strain gauge. Make sure that there is a shearing force across the center and edges when weight is applied for a proper reading.)