Intel® Edison Kit for Arduino

This kit includes the Intel Edison board with an Arduino Breakout, which essentially gives your Edison the ability to interface with Arduino shields or any board with the Arduino footprint.

More details

Have a question? 0 answered questions

More info
Customer Questions & Answers

This kit includes an Arduino Breakout, which essentially gives your Edison the ability to interface with Arduino shields or any board with the Arduino footprint.

Dimensions:127mm x 72mm x 12mm

The Intel Edison module is included.

Features

Uses a 22nm Intel® SoC that includes a dual core, dual threaded Intel® Atom™ CPU at 500MHz and a 32-bit Intel® Quark™ microcontroller at 100 MHz. It supports 40 GPIOs and includes 1GB LPDDR3, 4 GB EMMC, and dual-band WiFi and BTLE on a module slightly larger than a postage stamp.
The Intel Edison module will initially support development with Arduino* and C/C++, followed by Node.JS, Python, RTOS, and Visual Programming support in the near future.
It includes a device-to-device and device-to-cloud connectivity framework to enable cross-device communication and a cloud-based, multi-tenant, time-series analytics service.
Has an SD card connector, micro USB or standard sized USB host Type-A connector(via mechanical switch), Micro USB device, 6 analog inputs, and 20 ditial input/output pins, 1x UART, 1x I2C, and 1x ICSP 6-pin header (SPI) Power jack with 7V-15V DC input.

Part List

Intel® Edison Module
Intel® Edison with Kit for Arduino

Specifications:

Physical
Form factor	Board with 70-pin connector
Dimensions	127.0 x 72.0 x 12.0 mm
Operating temperature	0 to 40 degC
Connector	Hirose DF40 Series (1.5mm, 2.0mm, or 3.0mm stack height)
Memory
Max Memory size	4GB
Memory type	DDR3, Nand Flash
Physical add. Ext.	32-bit
# of DIMMs	0
ECC Memory supported:	NO
External Interfaces
Total of 40 GPIOs which can be configured as:
SD Card	1 Interface
UART	2 Controllers
I2C	2 Controllers
SPI	1 Controller with 2 chip selects
I2S	1 Controller
GPIO	Additional 12 (with 4 capable of PWM)
USB 2.0	1 OTG Controller
Clock Output	32 KHz, 19.2 MHz
Major Edison Components
SoC	22nm Intel SoC includes: a dual core, dual threaded Intel Atom CPU at 500MHz, and a 32-bit Intel Quark microcontroller at 100 MHz
RAM	1 GB LPDDR3 POP memory
Flash Storage	4 GB eMMC
WiFi	Broadcom 43340 802.11 a/b/g/n
	Dual-band (2.4 and 5 GHz)
	On board antenna or external antenna SKU configurations
Bluetooth	BT 4.0
Power
Input	3.3V - 4.5V
Output	100ma @3.3V and 100ma @ 1.8V
Power	Standby (No radios): 13mW
	Standby (BT 4.0): 21.5mW
	Standby (WiFi): 35 mW
Firmware + Software
CPU OS	Yocto Linux v1.6
Development Environments	Arduino IDE
	Eclipse supporting: C, C++, Python
	Intel XDK supporting: Node.JS, HTML5
MCU OS	RTOS
Development Environments	MCU SDK and IDE