Teensy OctoWS2811 Adapter

Features:

• Control WS2811, WS2812, WS2812B and APA102 Addressable RGB LED strips from your Teensy with this adapter!

• This adapter board connects Teensy 3.2 to thousands of LEDs using the OctoWS2811 Library.

• Features a 74HCT245 buffer chip and 100 ohm impedance matching resistors.
• CAT6 Ethernet cable is used from this board to the LED strips.
• CAT6 cable is designed for very high bandwidth, minimal cross-talk between twisted pairs, and 100 ohm impedance, for a very high quality signal.
• The RJ-45 network jacks allow your LED array to be easily disconnected from the electronics.
• Four mounting screws are supplied with the OctoWS2811 Adaptor board.
• Teensy 3.x is added on top of the adaptor using stacking header pins, or a header and socket pair if you wish to be able to remove the Teensy 3.x board.
• Supports dithering & gamma correction via OctoWS2811 library