USB AVR Programmer

This USB AVR programmer is a 10 pin USB in-circuit programmer for Atmel AVR microcontroller chips such as the ATtiny85. Based on the ATMega88, this programmer uses a firmware-only USB driver so no special USB controller is needed! Just plug this programmer into your computer's USB port and hook up to the chip you want to program.

• Read or write to your microcontroller
• Allows you to edit the microcontroller's:
• EEPROM
• Firmware
• Fuse bits and Lock bits
• Support for Windows, MAC OS X and Linux
• 5KB/s maximum write speed
• Software controlled SCK option to support chips with low clock speeds (< 1.5MHz)
• Standard ICSP 10-pin pinout
• Power and Programming Indicator LEDs onboard
• Over-current protection
• Supports both 5V and 3V logic
• Capable of programming the following chips:
• AT89S51
• AT89S52
• AT89S53
• AT89S8252
• ATTiny12(L)
• ATTiny13(V)
• ATTiny15(L)
• ATTiny24(V)
• ATTiny25(V)
• ATTiny26(L)
• ATTiny2313(V)
• ATTiny44(V)
• ATTiny45(V)
• ATTiny84(V)
• ATTiny85(V)
• AT90S2313(L)
• AT90S2323(L)
• AT90S2343(L)
• AT90S1200(L)
• AT90S8515(L)
• AT90S8535(L)
• ATMEGA48(V)
• ATMEGA8(L)
• ATMEGA88(V)
• ATMEGA8515(L)
• ATMEGA8535(L)
• ATMEGA16(L)
• ATMEGA162(V)
• ATMEGA163(L)
• ATMEGA164(V)
• ATMEGA165(V)
• ATMEGA168(V)
• ATMEGA169(V)
• ATMEGA169P(V)
• ATMEGA32(L)
• ATMEGA324(V)
• ATMEGA325(V)
• ATMEGA3250(V)
• ATMEGA329(V)
• ATMEGA3290(V)
• ATMEGA64(L)
• ATMEGA640(V)
• ATMEGA644(V)
• ATMEGA645(V)
• ATMEGA6450(V)
• ATMEGA649(V)
• ATMEGA6490(V)
• ATMEGA128(L)
• ATMEGA1280(V)
• ATMEGA1281(V)
• ATMEGA2560(V)
• ATMEGA2561(V)
• AT90CAN32
• AT90CAN64
• AT90CAN128
• AT90PWM2(B)
• AT90PWM3(B)
• & more