Categories

Newsletter

USB to TTL Serial Cable (For Raspberry Pi Debugging)

Use this USB to TTL Serial Cable to for debugging on the Raspberry Pi. This is the best way to log into the console and see what your Raspberry Pi is up to.

More details

Availability: SHIPS TODAY

Last Updated: 03/19/2024

Tinkersphere

TS-317

$9.90

This USB to TTL Serial Cable is useful for connecting to your Raspberry Pi, Beaglebone Black or any other device that uses a TTL Serial connection. With this cable, you'll be able to see what your Raspberry Pi is doing by logging into the debug console. This means you can use the command line to interact with your Raspberry Pi. This is very useful for troubleshooting Raspberry Pi issues! When using with Windows, just download and open up PuTTY, select Serial as the connection type, then type in the COM port your cable is assigned to (you can check this in Device Manager) and the baud rate of 115200. Default Raspberry Pi Login credentials are:

User: pi

Password: raspberry

 

Specifications:

  • Wires:
    • White: Tx ( 3.3V transmitting signal into the USB port)
    • Green: Rx ( 3.3V receiving signal from the USB port)
    • Red: Power ( 5V 500mA ) If you wish to power your Raspberry Pi from this pin, do not connect it to the USB
    • Black: Ground
  • Cable Length: 1m / 3.3 ft
  • USB 2.0 Compliant
  • Compatible with 3.3V chipset devices such as Raspberry Pi and Beaglebone (Arduino is a 5V chipset device and requires the FTDI USB to Serial Cable)
  • Supports RS-232
  • Internal Chip: PL2303HX USB to Serial Bridge Controller
  • Internal Clock: 96 Mhz ( 115200 baud )
  • Driver:
    • Windows Driver (Note: If your driver gets automatically updated by windows, you may need to go into Device Manager and click "Roll Back Driver" under Properties to ensure this one is the one being used. This applies to Windows 8.)


No customers have asked questions about this product yet.

Customers who bought this item also bought