Categories

Newsletter

Orange Pi PC Plus: 1GB RAM 1.6Ghz Quad-Core Processor

It’s an open-source single-board computer. It can run Raspberry Pi software, Android 4.4, Ubuntu, Debian & Banana Pi Images. It uses the 1.6Ghz quad core Cortex A7 ARM AllWinner H3 SoC, and has 1GB DDR3 SDRAM, 8GB eMMC onboard memory and built in Wifi.

More details

Availability: IN STOCK

Tinkersphere

TS2044

$39.99

The Orange Pi PC Plus with built in wifi, 1G of RAM and 8GB of onboard memory is a little PC that can be used like any other computer and can run a full range of ARM GNU/Linux distributions including Raspberry Pi images, Ubuntu, Debian, and also Android 4.4! USB mice and keyboard compatible with ethernet connectivity and high-definition video capabilities. The Orange Pi PC Plus boasts a quad core processor (H3 Quad-core Cortex-A7 H.265/HEVC 4K), built in wifi with external antenna, 8GB of onboard storage as well as a microSD card reader to boot off and store to a microSD card. Mali400MP2 GPU @600MHz graphics card for enhanced graphics as well! Other extra features include a built in IR receiver for controlling via a remote control, on board microphone and Power button! Pinout is the same as the Raspberry Pi 3, 2 & B+ models so you have a stronger processor and extra features combined with compatibility!

In summary, the Orange Pi PC Plus is the big brother to the Orange Pi PC with built in wifi and added 8GB of eMMC onboard memory. It also has a quadcore chipset (1.6Ghz Quad core Cortex A7 ARM AllWinner H3), built-in IR receiver, power button, mic, separate debug TTL pins so you don't waste your GPIO pins, the same amount of RAM, same I/O pins as the Raspberry Pi, 3 USB ports, an ethernet port, USB OTG port, camera port, HDMI and composite video/audio outputs and microSD card storage as the Raspberry Pi 3.

Check out our Raspberry Pi / Orange Pi Starter Kit which includes all the accessories you'll need to get started!

Technical Specs:

 CPU

H3 Quad-core Cortex-A7 H.265/HEVC 4K

GPU

Mali400MP2 GPU @600MHz
Supports OpenGL ES 2.0                                                                                                                                     

Memory (SDRAM)

1GB DDR3 (shared with GPU)

Onboard Storage

TF card (Max. 64GB) / MMC card slot

8GB EMMC Flash

Onboard Network

10/100 Ethernet RJ45

Wifi with external antenna

 

Video Input

A CSI input connector Camera:

Supports 8-bit YUV422 CMOS sensor interface

Supports CCIR656 protocol for NTSC and PAL

Supports SM pixel camera sensor

Supports video capture solution up to 1080p@30fps

Audio Input

Microphone

Video Outputs

Supports HDMI output with HDCP

Supports HDMI CEC

Supports HDMI 30 function

Integrated CVBS

Supports simultaneous output of HDMI and CVBS

Audio Output

3.5mm Jack and HDMI

Power Source

USB Ports

Three USB 2.0 HOST, one USB 2.0 OTG

Buttons

Power button

GPIO Pins

40 Pin Header (compatible with Raspberry Pi)                                                                                             

Separate TTL Pins

UART, ground

LEDs

Power LED & Status LED

Remote Control Receiver

IR receiver (for use with a remote control)

Supported OS

Raspberry Pi images, Android, Lubuntu, Ubuntu, Debian, Banana Pi images

Physical Dimensions & Weight

Product size

85mm × 55mm  

Weight

38g